Cords Offers a variety of washers. They are listed below – many with descriptions.

 Standard:

These washers are made to be used with standard screw sizes #2 up to 1/2. They come in the four most popular thicknesses, from 1/32″ up to 1/8″. If one of these dimensions is not quite what you need, don’t forget to see our section on special nylon flat washers (pages 187-189).

Seal, insulate, absorb shock and vibration. They prevent galling and marring, and may also be used as spacers, guides, bearings, bushings, etc. For washers thicker than .125″, look at our standard and special spacers on pages 136-139. Metric washers can be found on page 191.

Other sizes can be tooled for moulding or stamping in any plastic.

Request a quotation, specifying size, tolerance and quantity. See the list at the end of this section for other nonmetallic materials available.

 Nylon Flat Washers

Similar to our standard flat washer, but with a specially configured inside diameter designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw.

For use in applications requiring preassembly of the screw and washer to reduce final assembly cost. Other sizes may be tooled on request

Other Nuts, Bolts and Screws Offered…

Metric Nylon Washers

Stamped PVC Flat Washer

Black Fibre Flat Washers

Black Neoprene Flat Washers

White Teflon Washers

Nylon Turtleneck Products

Nylon Finishing Washers

Nylon Shoulder Washers

Screw Insulators

Acetal Bolt Insulator and Steel Washer Sets

---

Share

• Tweet